Speed 745r Min Yrkk Hv Slip Ring Induction Motor

Speed 745r Min Yrkk Hv Slip Ring Induction Motor

The power amount, installation proportions and electrical overall performance of the HV substantial-voltage slip ring three-phase asynchronous motor are in compliance with relevant IEC standards. The fundamental set up technique of the motor is the horizontal base angle (IMB3), the operating method is the steady doing work technique (S1), and the wound rotor is manufactured of Class F insulation content.
The bearing of HV wound rotor slip ring motor has two sorts of rolling bearing and sliding bearing, relying on the motor electrical power and pace. If the motor has a large degree of protection, the defense stage of the bearing will also enhance. The rated frequency of the motor’s energy supply is 50Hz, the rated voltage is 6000V/10000V, and the fundamental sort of defense is IP54. The motor slip ring housing can be guarded to IP22 or IP23. Other voltage, frequency and degree of safety motors are also CZPT upon request.
HV winding rotor slip ring motor major outlet box is IP54 security grade, normally put in on the right facet of the motor (experiencing the motor shaft extension conclude), can also be set up on the still left side of the motor in accordance to the purchase demands. Inside the major outlet box, outside There are independent floor terminals.
HV winding slip ring motor boosts the location and bearing temperature measuring device. It can also add heating device inside of the motor. The shaft extension essential of the motor generally adopts the tangential key, and the motor carbon brush is not lifting structure.
HV wound rotor slip ring motor can be utilized to drive a variety of different equipment, this sort of as compressors, pumps, crushers, reducing machine instruments, transportation equipment and other mechanical gear, in mining, equipment business, petrochemical market, electrical power crops, and so on. Utilized as key mover in various industrial and mining enterprises. The motor used to drive the blower, coal mill, rolling mill and winch must point out the objective and specialized specifications when buying, and adopt particular design and style to guarantee trustworthy operation.

Middle top range: H355 ~ 1000mm
Electricity selection: 220kW ~ 10000kW
Amount of poles: two/four/6/eight/ten/twelve
Rated voltage: 3000V/6000V/6600V/10000V/11000V
Rated frequency: 50HZ/60HZ
Defense stage: IP23 or IP44
Insulation class: F
Work program: S1 (continuous)
Cooling technique: IC01/IC611
Installation form: IMB3
Motor connection: Y (a few outlet terminals in the junction box, the junction box from the extension of the spindle is situated on the right side of the base)
Altitude: no more than 1000m
This kind of motor is appropriate for use in environments where the ambient air temperature does not exceed 40 ° C and there is no severe dust, the minimum ambient air temperature is -15 ° C, and there is no corrosive and explosive gasoline in the air (which can also be created into a damp warmth or higher-altitude motor).

No. Squirrel-cage motor Y JS YKK YKS Y2, Y3
Slip ring motor YR JR JR2 YRKK YRKS YR2, YR3
1 Construction Box-sort development, produced up of steel plates welded with each other Compact struction
2 Cooling method IC01 or (IC11, IC21, IC31) IC611 or IC616 IC81W IC411
three Natural ventilation, with top mounted defense include With leading mounted air-air cooler With leading mounted air-h2o cooler  
4 Security sort IP23 IP44 or IP54 IP44 or IP54 IP54
five Insulation F
6 Mounting arrangement IMB3
7 Voltage CZPT 380 v, 2400 v, 3kv, 3.3kv  4160 v,    6kv, six.6kv      10kv, 11kv
eight Frequency CZPT 50Hz , 60Hz

The HV wound rotor slip ring motor can improve the large starting up torque at a little commencing existing. The motor is appropriate for apps the place the capability of the feeder line is insufficient to begin the squirrel-cage rotor, the starting time is extended, the commencing is frequent, and the small-assortment velocity regulation is necessary. This collection of motors has the benefits of large efficiency, strength conserving, lower sound, reduced vibration, gentle bodyweight, trustworthy efficiency, convenient installation and servicing.

Main procedure stream of the motor
Motor stator: casing processing → punching press → iron core seating → coil creating → weaving → dipping paint drying
Electronic rotor: blank shaft processing → iron core press set up → iron main solid aluminum → rotor string shaft → weave → dipping paint drying → dynamic balance
Motor assembly: stator rotor assembly → device test → motor appearance coloring → packaging storage

one. The outer packaging of the products are all normal export-oriented wood plywood packaging.
2, the merchandise packaging is guarded by humidity, drinking water plastic soft packaging
3. For goods with special transportation requirements (this sort of as temperature, fragile, variability, and easy to get damp), the packaging defense steps will be strengthened, and the focus on mark will be printed on the deal.
4. There are clear symptoms and symbols on the packing box that should be paid out consideration to throughout transportation and storage (these kinds of as place, dampness, rain, shockproof, lifting placement, and many others.).

 

Speed 745r Min Yrkk Hv Slip Ring Induction Motor

Tags: