Condition: New

Device Value: $ 1,040.61

BN 205 0571 Excavator Components Last Travel Reduction Gearbox Provider Planetary Equipment For CZPT ZX2 14608847 Vacation REDUCTION Gear BOX 
For CZPT Closing Generate

For CZPT Travel System

For CZPT Traveling Motor

For CZPT Traveling Reduction Equipment

For CZPT Swing Unit

For CZPT Swing Motor

For CZPT Swing Reduction Equipment

For CZPT Primary Pump & Pump Parts

For CZPT Axle & Transmission Parts

For CZPT Main Handle Valve

For CZPT Joystick and Pedal Valve

For CZPT Middle Joint

For CZPT Cylinder
Bonfiglioli  winch reducer 716  718  717C3H10A131J9H-145U26

Two light-weight-obligation tandem vibratory rollers 
Twin Drum Vibratory Roller 

Cummins engine 

Kind	XD111		XD121	XD131
Operating mass(kg)	11230		12300	13080
Mass distributed on entrance drum(kg)	5670		6210	6540
Mass distributed on rear drum(kg)	5560		6090	6540
Static linear load on front drum(N/cm)	292		286	301
Static linear load on rear drum(N/cm)	287		280	301
Velocity assortment(km/h)	0-10		-10	-ten
Theoretical gradeability(%)	30		thirty	30
Min. inner/outer turning radius(mm)	4000/5900		3870/6000	3870/6000
Crab-going for walks distance (mm)	200		two hundred	two hundred
Min. ground clearance(mm)	420		420	420
Wheel foundation (mm)	4000		4000	4000
Steering angle(±)	46		forty six	forty six
Swinging angle(±)	12		twelve	twelve
Vibrating frequency(HZ)	30-forty eight		thirty-45	30-45
Nominal amplitude(mm)	0.41/.8		.41/.eight	.4/.seventy two
Centrifugal drive(kn)	66/133		70/one hundred forty	82/one hundred fifty
Product and maker	COMMINS 483.9
Rated rotating pace(t/min)	2200	2200		2200
Rated Electrical power(KW)ninety three	ninety three	93		93
Rated oil wear (g. kw/h)229	229	229		229
H2o tank ability(L)	two*450	2*450		two*450
Fuel tank capacity(L)	two hundred	220		220

  

Most affordable Price tag Hydraulic One Drum Vibratory Compactor Xs142j in Philippines
XcHydraulic One-Drum Vibratory Rollers Ability 14 Tons Xs142j in Indonesia
Compacting Value Xm Solitary Drum Road Roller Xs142j
Brand name New Xc 14t Solitary Drum Vibratory Highway Roller Xs142j
12 Ton Hydraulic Tandem Vibratory Roller Compactor Xd122
Liugong 12 Ton Double Drum Street Roller Price Clg6212e
Xc18 Ton Highway Roller Xs182j
Sdlg fourteen Ton Vibratory Highway Roller Compactor RS8140
2017 New Price tag CZPT Pneumatic Tire Road Roller Clg630r
14 Tons Double Drum Vibratory Roller Xd142
Scorching Sale Highway Compactor ten Ton Tandem Vibratory Roller Xd102
3 Ton CZPT Well-liked Vibratory Mini Highway Roller (Ltc203)
11 Ton Hydraulic Double Drum Road Roller Xd111e
12 Ton Hydraulic Double Drum Highway Roller Xd121e
11300kg Double Drum Roller CZPT Xd111e
11 Tons Hydraulic Vibratory Double Drum Compactor Xd111e
Liugong Vibration Highway Roller Potential Clg614
Inexpensive Cost Xihu (West Lake) Dis.n 16ton Road Roller Yz16-7 Sale
Xs202j twenty Ton One Drum Vibratory Highway Roller
11 Ton Vibratory Double Drum Street Roller Xd111e
Product Teams
Wheel Loader
Truck Crane
Excavator
Bulldozer
Motor Grader
Road Roller
Backhoe Loader
Heavy Truck
Crawler Crane
Tower crane
 

US $950 / Piece |

1 Piece (Min. Order)

###

Shipping Cost: Estimated freight per unit.	To be negotiated

###

Application:	Motor
Function:	Distribution Power
Layout:	Three-Ring

###

Customization:	Available | Customized Request

###

Possible Substitute for Part Number: DYNAPAC 377294

Part Applications: DYNAPAC CC900G

###

Part Number: 4812118170 – DYNAPAC

Description: HYDR MOTOR

Condition: New Unit Price: $ 1,040.61

###

Type	XD111		XD121	XD131
Working mass(kg)	11230		12300	13080
Mass distributed on front drum(kg)	5670		6210	6540
Mass distributed on rear drum(kg)	5560		6090	6540
Static linear load on front drum(N/cm)	292		286	301
Static linear load on rear drum(N/cm)	287		280	301
Speed range(km/h)	0-10		0-10	0-10
Theoretical gradeability(%)	30		30	30
Min. inner/outer turning radius(mm)	4000/5900		3870/6000	3870/6000
Crab-walking distance (mm)	200		200	200
Min. ground clearance(mm)	420		420	420
Wheel base (mm)	4000		4000	4000
Steering angle(±)	46		46	46
Swinging angle(±)	12		12	12
Vibrating frequency(HZ)	30-48		30-45	30-45
Nominal amplitude(mm)	0.41/0.8		0.41/0.8	0.4/0.72
Centrifugal force(kn)	66/133		70/140	82/150
Model and manufacturer	COMMINS 483.9
Rated rotating speed(t/min)	2200	2200		2200
Rated Power(KW)93	93	93		93
Rated oil wear (g. kw/h)229	229	229		229
Water tank capacity(L)	2*450	2*450		2*450
Fuel tank capacity(L)	200	220		220

US $950 / Piece |

1 Piece (Min. Order)

###

Shipping Cost: Estimated freight per unit.	To be negotiated

###

Application:	Motor
Function:	Distribution Power
Layout:	Three-Ring

###

Customization:	Available | Customized Request

###

Possible Substitute for Part Number: DYNAPAC 377294

Part Applications: DYNAPAC CC900G

###

Part Number: 4812118170 – DYNAPAC

Description: HYDR MOTOR

Condition: New Unit Price: $ 1,040.61

###

Type	XD111		XD121	XD131
Working mass(kg)	11230		12300	13080
Mass distributed on front drum(kg)	5670		6210	6540
Mass distributed on rear drum(kg)	5560		6090	6540
Static linear load on front drum(N/cm)	292		286	301
Static linear load on rear drum(N/cm)	287		280	301
Speed range(km/h)	0-10		0-10	0-10
Theoretical gradeability(%)	30		30	30
Min. inner/outer turning radius(mm)	4000/5900		3870/6000	3870/6000
Crab-walking distance (mm)	200		200	200
Min. ground clearance(mm)	420		420	420
Wheel base (mm)	4000		4000	4000
Steering angle(±)	46		46	46
Swinging angle(±)	12		12	12
Vibrating frequency(HZ)	30-48		30-45	30-45
Nominal amplitude(mm)	0.41/0.8		0.41/0.8	0.4/0.72
Centrifugal force(kn)	66/133		70/140	82/150
Model and manufacturer	COMMINS 483.9
Rated rotating speed(t/min)	2200	2200		2200
Rated Power(KW)93	93	93		93
Rated oil wear (g. kw/h)229	229	229		229
Water tank capacity(L)	2*450	2*450		2*450
Fuel tank capacity(L)	200	220		220

How to Maximize Gear Motor Reliability

A gearmotor is a mechanical device used to transmit torque from one location to another. As its name implies, it is designed to rotate one object relative to another. Its main use is to transmit torque from one point to another. The most common types of gear motors are: worm, spur, and helical. Each of these has specific functions and can be used for a variety of applications. Reliability is also an important factor to consider when choosing a gearmotor.

Applications of a gear motor

Despite its small size, a gear motor has many applications. These include heavy machinery lifts, hospital beds, and power recliners. It is also found in many everyday products, such as electromechanical clocks and cake mixers. Its versatility allows it to produce a high force from a small electric motor. Here are some of its most common uses. You can also find a gear motor in many household appliances and vehicles.
Before selecting a gearmotor, consider the specifications of the machine you need to power. You should consider its size, weight, and ambient conditions, which include temperature regimes, noise levels, and contaminating sources. You should also take into account the envelope size, mounting method, and orientation. Other considerations include the expected service life, maintenance scope, and control type. The most suitable gearmotor for your specific application will be one that can handle the load.
The motor and gearbox types can be mixed and matched, depending on the application. A three-phase asynchronous motor and a permanent magnet synchronous servomotor are common choices for these devices. The type of motor and gearbox combination you choose will determine the power supply, the efficiency of the motor, and cost. Once you understand the application, it will be easy to integrate a gear motor into your system.
When used in industrial applications, gear motors are effective for reducing the speed of rotating shafts. One third of all industrial electric motor systems use gearing to reduce output speed. They can also save energy, which benefits the workers who operate them. In fact, industrial electric motor systems are responsible for nearly one-tenth of the carbon dioxide emissions that are produced by fossil-fueled power plants. Fortunately, efficiency and reliability are just two of the benefits of using gear motors.

Types

Before choosing a gearmotor, it is important to understand its specifications. The key factors to consider are the size, weight, and noise level of the gearmotor. Additionally, the power, torque, and speed of the motor are important factors. Specifications are also important for its operating environment, such as the temperature and the level of ingress protection. Finally, it is important to determine its duty cycle to ensure it will operate properly. To choose a suitable gearmotor, consult the specifications of your application.
Some common applications of gearmotors include packaging equipment, conveyors, and material handling applications. They also come with several advantages, including their ability to control both position and speed. This makes them ideal for applications where speed and positioning are crucial. Parallel-shaft gear units, for instance, are commonly used in conveyors, material handling, and steel mills. They are also able to operate in high-precision manufacturing. For these reasons, they are the most popular type of gearmotor.
There are three common types of gears. Helical gears have teeth that are inclined at 90 degrees to the axis of rotation, making them more efficient. Helicoidal gears, meanwhile, have a lower noise level and are therefore preferred for applications requiring high torque. Worm gears are preferred for applications where torque and speed reduction are important, and worm gears are suited for those conditions. They also have advantages over spur gears and worm gears.
The application of a gear motor is almost limitless. From heavy machine lifts to hospital bed lifting mechanisms, gear motors make it possible to use a small rotor at a high speed. Their lightweight construction also allows them to move heavy loads, such as cranes, but they do so slowly. Gear motors are an excellent choice in applications where space is an issue. A few common applications are discussed below. When choosing a gear motor, remember to choose the best size and application for your needs.

Functions

A gearmotor’s speed is directly proportional to the gear ratio. By dividing the input speed by the gear ratio, the output speed can be determined. Gear ratios above one reduce speed, while gear ratios below one increase speed. Efficiency of a gearmotor is defined as its ability to transfer energy through its gearbox. This efficiency factor takes into account losses from friction and slippage. Most gearmotor manufacturers will provide this curve upon request.
There are several factors that must be considered when choosing a gearmotor. First, the application must meet the desired speed and torque. Second, the output shaft must rotate in the desired direction. Third, the load must be properly matched to the gearmotor. Lastly, the operating environment must be considered, including the ambient temperature and the level of protection. These details will help you find the perfect gearmotor. You can compare various types of gear motors on this page and choose the one that will meet your needs.
The micro-DC gear motor is one of the most versatile types of geared motors. These motors are widely used in intelligent automobiles, robotics, logistics, and the smart city. Other applications include precision instruments, personal care tools, and cameras. They are also commonly found in high-end automotives and are used in smart cities. They also find use in many fields including outdoor adventure equipment, photography equipment, and electronics. The benefits of micro-DC gear motors are many.
The main function of a gear motor is to reduce the speed of a rotating shaft. Small electric clocks, for example, use a synchronous motor with a 1,200-rpm output speed to drive the hour, minute, and second hands. While the motor is small, the force it exerts is enormous, so it’s crucial to ensure that the motor isn’t over-powered. There is a high ratio between the input torque and the output torque.

Reliability

The reliability of a gear motor is dependent on a number of factors, including material quality, machining accuracy, and operating conditions. Gear failure is often more serious than surface fatigue, and can compromise personal safety. Reliability is also affected by the conditions of installation, assembly, and usage. The following sections provide an overview of some important factors that impact gear motor reliability. This article provides some tips to maximize gear motor reliability.
First and foremost, make sure you’re buying from a reliable supplier. Gear motors are expensive, and there is no standardization of the sizes. If a gear breaks, replacing it can take a lot of time. In the long run, reliability wins over anything. But this doesn’t mean that you can ignore the importance of gears – the quality of a gear motor is more important than how long it lasts.

Cost

The cost of a gear motor is relatively low compared to that of other forms of electric motors. This type of motor is commonly used in money counters, printers, smart homes, and automation equipment. A DC gear motor is also commonly used in automatic window machines, glass curtain walls, and banknote vending machines. There are many advantages to using a gear motor. Here are a few of them. Read on to learn more about them.
Speed management is another benefit of a gear motor. The motors tend to have less wear and tear than other motors, which means less frequent replacements. Additionally, many gear motors are easy to install and require less maintenance, which also helps reduce the overall cost of ownership. Lastly, because noise is a common concern for many electronic OEMs, DC gear motors are often quieter than their counterparts. For these reasons, they are often used in industrial settings.
Another advantage of an electric gear motor is its size and power. They are typically designed for 12V, 24V, and 48V voltages and 200-watt power. Their rated speed is 3000 rpm and their torque is 0.64 Nm. They are also more reliable than their AC counterparts and are ideal for many industrial applications. They have a high ratio of three to two, which makes them ideal for a variety of applications.
A gear motor is an electric motor that is coupled with a gear train. It uses AC or DC power, and is often called a gear reducer. The main purpose of these gear reducers is to multiply torque, while maintaining compact size and overall efficiency. However, the efficiency of a gear motor is also affected by ambient temperature and lubricants. If the gear motor is installed in the wrong location, it may be ineffective and result in premature failure of the machine.

editor by czh 2023-01-02