China Aluminum Housing 3 phase Electrical Motor 0.37KW 0.5HP with Hot selling

Model Number: YS-7124-4
Type: Asynchronous Motor
Frequency: 50HZ/60HZ
Phase: Three-phase
Protect Feature: Totally Enclosed
AC Voltage: 220V /380V
Efficiency: IE 2
Housing: Aluminum
Rated Speed: 1500(r/min)
Protection class: IP54/IP55
Weight: 10KGS
Structure: IMB3/B5/B35/V1
Function: Control
Cooling method: IC411
Winding: 100% Cooper Wire
Certification: CCC, ce
Packaging Details: Cartons or wooden cases
Port: ZheJiang , HangZhou

HangZhou Nanfang Motor Co., Ltd. (Herein after Nanfang) was established in 1992 with the registered capital of RMB 38 million. Nanfang is 1 of the best motor manufacturers in China with annual capacity of 500,000 sets. It has an area of 30,000 square meters, over 220 staff including 26 professional technicians. Its major products are reducers-exclusive motor, YS series fractional horsepower motor,YE3 series and YX3 series high efficiency motor, YEJ series brake motor, YVP series variable frequency motor, YB3 series explosion-proof motor, YD series double-speed motor, aluminum-shell motors and other specialized motors. Nanfang motor has been certificated by IS0 9001 , 3C and CE since 2001.

Brief introduction of Low-power induction Motor

YS series three-phase induction motor commonly is used for industrial production and daily electric appliance and has a big proportion in micro-electric-machinery.Horsepower series electric machinery is widely used for small model machinery, such as small model air-compressed,mineral industry tools,spinner,chemical industrial equipment and medical instrument, ect. YS type 3-phase asynchronous motor, power at 180-750watt, starting force at 2.2 times, overload capacity at 2.4 times.The designations, signs and nominal values are all in conformity with I.E.C standards.
BENEFITS

1) Water dust and corrosion resistant
2) Quiet operation
3)simple,safe,and convenient
4) Reliable in country, city or factory environment
5) Very low vibration
6) Very low power consumption
7) Superior life
8)high output and high torque

Site conditions Motors are suitable for most working environment at temperature from -15°C t0 +40°C and altitude below 1000 meters
Insulation The motors’ insulation system is set to Class F(105K), examined by Class B(80K), which ensure the life span and reliability of the motors.
Motor protection Motors can be installed with PTC, PT100 used as winding and bearing temperature measurement on request.
Voltage and frequency Standard voltage and frequency is 380V 50HZ, and can be set to any single voltage in the range of 200-660V at a frequency of 50 or 60HZ. The motors work well within variations of ±5% from the rated voltage.
Vibration Motors are designed to vibration class A, vibration class B is available on request.
Duty Continuous(S1)
Cooling and ventilation The standard cooling method is totally enclosed fan cooled(TEFC) in accordance with IC411 of IEC60034-6. Standard motors are equipped with auxiliary plastic fans.
Winding 100% Cooper Wire
Protection class The standard protection class is IP54/IP55, which can be used in humid and dusty environment. Higher degrees of protection is available.
Quality assurance From the first line of production designing till the finishing procedure, obey ISO9001 documented quality system.
1 Shaft cover 11 IP55 gasket 21 Ring for lightening
2 V-ring 12 Mains power connection terminal block 22 Fan cover
3 Motor clamping screws 13 Terminal block box- base 23 Motor indentification plate
4 Spring ring 14 IP65 gasket 24 Motor indentification plate lightening screws
5 Shield 15 Terminal block box- cover 25 B5 motor casing
6 Bearing 16 Terminal block box- lightening screws 26 B5 flange
7 Motor Shaft 17 Cable inlet bush 27 B14 flange
8 Rotor 18 Compensation ring 28 Sealing ring
9 Wound stator 19 Fan cover lightening screws 29 Shaft key
10 Motor casing B3-B5 20 PVC fan

YS series three-phase induction motor mounting dimension

View more details, please click here.

FAQ
More details, welcome to call us!Q: What are the payment terms?A: 30% T/T in advance, 70% before shipment, L/C at sight, trade assurance from alibaba.
Q: What is your delivery time? A: Different models with different time, 10-50 days after order confirmed.
Q: What is your MOQ?A: It depends on model.Q: Where is your loading port?A: ZheJiang or HangZhou Port, China.
About how to inquiry and place an order, how to install, operate and maintain motors, please refer to this website.

Benefits of a Planetary Motor

If you’re looking for an affordable way to power a machine, consider purchasing a Planetary Motor. These units are designed to provide a massive range of gear reductions, and are capable of generating much higher torques and torque density than other types of drive systems. This article will explain why you should consider purchasing one for your needs. And we’ll also discuss the differences between a planetary and spur gear system, as well as how you can benefit from them.

planetary gears

Planetary gears in a motor are used to reduce the speed of rotation of the armature 8. The reduction ratio is determined by the structure of the planetary gear device. The output shaft 5 rotates through the device with the assistance of the ring gear 4. The ring gear 4 engages with the pinion 3 once the shaft is rotated to the engagement position. The transmission of rotational torque from the ring gear to the armature causes the motor to start.
The axial end surface of a planetary gear device has two circular grooves 21. The depressed portion is used to retain lubricant. This lubricant prevents foreign particles from entering the planetary gear space. This feature enables the planetary gear device to be compact and lightweight. The cylindrical portion also minimizes the mass inertia. In this way, the planetary gear device can be a good choice for a motor with limited space.
Because of their compact footprint, planetary gears are great for reducing heat. In addition, this design allows them to be cooled. If you need high speeds and sustained performance, you may want to consider using lubricants. The lubricants present a cooling effect and reduce noise and vibration. If you want to maximize the efficiency of your motor, invest in a planetary gear hub drivetrain.
The planetary gear head has an internal sun gear that drives the multiple outer gears. These gears mesh together with the outer ring that is fixed to the motor housing. In industrial applications, planetary gears are used with an increasing number of teeth. This distribution of power ensures higher efficiency and transmittable torque. There are many advantages of using a planetary gear motor. These advantages include:
Motor

planetary gearboxes

A planetary gearbox is a type of drivetrain in which the input and output shafts are connected with a planetary structure. A planetary gearset can have three main components: an input gear, a planetary output gear, and a stationary position. Different gears can be used to change the transmission ratios. The planetary structure arrangement gives the planetary gearset high rigidity and minimizes backlash. This high rigidity is crucial for quick start-stop cycles and rotational direction.
Planetary gears need to be lubricated regularly to prevent wear and tear. In addition, transmissions must be serviced regularly, which can include fluid changes. The gears in a planetary gearbox will wear out with time, and any problems should be repaired immediately. However, if the gears are damaged, or if they are faulty, a planetary gearbox manufacturer will repair it for free.
A planetary gearbox is typically a 2-speed design, but professional manufacturers can provide triple and single-speed sets. Planetary gearboxes are also compatible with hydraulic, electromagnetic, and dynamic braking systems. The first step to designing a planetary gearbox is defining your application and the desired outcome. Famous constructors use a consultative modeling approach, starting each project by studying machine torque and operating conditions.
As the planetary gearbox is a compact design, space is limited. Therefore, bearings need to be selected carefully. The compact needle roller bearings are the most common option, but they cannot tolerate large axial forces. Those that can handle high axial forces, such as worm gears, should opt for tapered roller bearings. So, what are the advantages and disadvantages of a helical gearbox?

planetary gear motors

When we think of planetary gear motors, we tend to think of large and powerful machines, but in fact, there are many smaller, more inexpensive versions of the same machine. These motors are often made of plastic, and can be as small as six millimeters in diameter. Unlike their larger counterparts, they have only one gear in the transmission, and are made with a small diameter and small number of teeth.
They are similar to the solar system, with the planets rotating around a sun gear. The planet pinions mesh with the ring gear inside the sun gear. All of these gears are connected by a planetary carrier, which is the output shaft of the gearbox. The ring gear and planetary carrier assembly are attached to each other through a series of joints. When power is applied to any of these members, the entire assembly will rotate.
Compared to other configurations, planetary gearmotors are more complicated. Their construction consists of a sun gear centered in the center and several smaller gears that mesh with the central sun gear. These gears are enclosed in a larger internal tooth gear. This design allows them to handle larger loads than conventional gear motors, as the load is distributed among several gears. This type of motor is typically more expensive than other configurations, but can withstand the higher-load requirements of some machines.
Because they are cylindrical in shape, planetary gear motors are incredibly versatile. They can be used in various applications, including automatic transmissions. They are also used in applications where high-precision and speed are necessary. Furthermore, the planetary gear motor is robust and is characterized by low vibrations. The advantages of using a planetary gear motor are vast and include:
Motor

planetary gears vs spur gears

A planetary motor uses multiple teeth to share the load of rotating parts. This gives planetary gears high stiffness and low backlash – often as low as one or two arc minutes. These characteristics are important for applications that undergo frequent start-stop cycles or rotational direction changes. This article discusses the benefits of planetary gears and how they differ from spur gears. You can watch the animation below for a clearer understanding of how they operate and how they differ from spur gears.
Planetary gears move in a periodic manner, with a relatively small meshing frequency. As the meshing frequency increases, the amplitude of the frequency also increases. The amplitude of this frequency is small at low clearance values, and increases dramatically at higher clearance levels. The amplitude of the frequency is higher when the clearance reaches 0.2-0.6. The amplitude increases rapidly, whereas wear increases slowly after the initial 0.2-0.6-inch-wide clearance.
In high-speed, high-torque applications, a planetary motor is more effective. It has multiple contact points for greater torque and higher speed. If you are not sure which type to choose, you can consult with an expert and design a custom gear. If you are unsure of what type of motor you need, contact Twirl Motor and ask for help choosing the right one for your application.
A planetary gear arrangement offers a number of advantages over traditional fixed-axis gear system designs. The compact size allows for lower loss of effectiveness, and the more planets in the gear system enhances the torque density and capacity. Another benefit of a planetary gear system is that it is much stronger and more durable than its spur-gear counterpart. Combined with its many advantages, a planetary gear arrangement offers a superior solution to your shifting needs.
Motor

planetary gearboxes as a compact alternative to pinion-and-gear reducers

While traditional pinion-and-gear reducer design is bulky and complex, planetary gearboxes are compact and flexible. They are suitable for many applications, especially where space and weight are issues, as well as torque and speed reduction. However, understanding their mechanism and working isn’t as simple as it sounds, so here are some of the key benefits of planetary gearing.
Planetary gearboxes work by using two planetary gears that rotate around their own axes. The sun gear is used as the input, while the planetary gears are connected via a casing. The ratio of these gears is -Ns/Np, with 24 teeth in the sun gear and -3/2 on the planet gear.
Unlike traditional pinion-and-gear reducer designs, planetary gearboxes are much smaller and less expensive. A planetary gearbox is about 50% smaller and weighs less than a pinion-and-gear reducer. The smaller gear floats on top of three large gears, minimizing the effects of vibration and ensuring consistent transmission over time.
Planetary gearboxes are a good alternative to pinion-and-gear drive systems because they are smaller, less complex and offer a higher reduction ratio. Their meshing arrangement is similar to the Milky Way, with the sun gear in the middle and two or more outer gears. They are connected by a carrier that sets their spacing and incorporates an output shaft.
Compared to pinion-and-gear reduces, planetary gearboxes offer higher speed reduction and torque capacity. As a result, planetary gearboxes are small and compact and are often preferred for space-constrained applications. But what about the high torque transfer? If you’re looking for a compact alt

China Aluminum Housing 3 phase Electrical Motor 0.37KW 0.5HP     with Hot selling	China Aluminum Housing 3 phase Electrical Motor 0.37KW 0.5HP     with Hot selling
editor by czh